07/03/2026
Round SandArt Usage Instructions:
(1) After receiving the goods, shake the product to shake off any small sand particles that may be attached to the surface.
(2) Check the bubbles to see if their width is the same as the width of your index finger. (If the size of the bubbles exceeds the width of your index finger, you can use a diabetic syringe to expel some air. If there are not enough bubbles, you can use a diabetic syringe to inject a small amount.)
(3) Let the product stand for 3 to 5 minutes, and then the loose sand will settle down slightly.
(4) If the bubbles are too big, shake it vertically up and down to make the bubble particles about 2 to 6 mm in size.
(5) Rotate the product 180 degrees so that the bubbles form a barrier between the water and the sand.
(6) Insert the USB interface, input a 5V power supply, and enjoy these beautiful hourglass paintings.
1. Safety Information:
(1) Do not use when wet.
(2) Maintenance and Cleaning: Do not allow water to enter the internal parts during maintenance and cleaning to avoid short circuits and electric shock risks.
